Advanced Bios Features - Acorp 4D533 User Manual

MAINBOARD BIOS SETUP

3.4 Advanced BIOS Features

This menu provides access to more advanced BIOS configuration settings that deal with
overall performance of the system and peripheral setup. This section allows you to configure
your system for advanced operation. You have the opportunity to select the system's default
speed, boot-up sequence, keyboard operation and security.
CMOS Setup Utility - Copyright ( C ) 1984 - 1999 Award Software
Virus Warning
CPU L1 & L2 Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot other device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
X Typematic Rate (Chars/Sec)
X Typematic Delay (Msec)
Security Option
APIC MODE
Mps Version Control For OS
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Report No FDD For WIN 95
↑ ↓ → ←: Move
F1: General Help
☆ Virus Warning
When enabled, the BIOS will monitor the boot sector and the partition table on the hard drive
for any attempt to modify. If an attempt is detected, the BIOS will halt the system and prompt
the warning message. Select "Disabled" if you are installing a new operating system.
36
Advanced BIOS Features
Enter: Select +/-/PU/PD: Value
F5: Previous Value F6: Fail-Safe Defaults
(Scroll down to see more items, as shown here)
User's Manual
Disabled
Enabled
Enabled
Floppy
HDD-0
LS120
Enable
Disabled
Disabled
On
Fast
Disabled
6
250
Setup
Enable
[1.4]
Non-OS2
Disabled
No
F10: Save
F7: Optimized Defaults
Item Help
Menu Level >
ESC: Exit