Table of Contents
Advertisement
MAINBOARD BIOS SETUP
!
!
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
X UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
PWRON After PWR-Fail
Game Port Address
Midi Port Address
Midi Port IRQ
↑ ↓ → ←: Move
F1: General Help
☆ On-Chip primary/Secondary PCI IDE
Select "Enabled" to activate each on-board IDE channel separately, Select "Disabled", if you
Installed and add-on IDE Control card.
☆ IDE Primary & Secondary Master/Slave PIO
These four PIO fields let you set a PIO mode (0-4) for each of four IDE devices. When
Under "Auto" mode, the system automatically set the best mode for each device.
☆ IDE Primary & Secondary Master/Slave UDMA
When set to "Auto" mode, the system will detect if the hard drive supports Ultra DMA
mode.
☆ USB Controller
Select Enabled if system contains a Universal Serial Bus (USB) controller.
Enabled
3F8 / IRQ4
2F8 / IRQ3
Normal
Half
378 / IRQ7
ECP
Off
201
330
10
Enter: Select
+/-/PU/PD: Value
F5: Previous Value
F6: Fail-Safe Defaults
User's Manual
Item Help
Menu Level >
F10: Save
ESC: Exit
F7: Optimized Defaults
43
Advertisement
Table of Contents
