Lan Wake-Up Connector; External Connectors - Acorp 4D533 User Manual

Table of Contents

HAREWARE INSTALLATION

2.2.10 LAN Wake-up Connector (Lan1)

The LAN Wake-up function will allow the network to wake up a Soft Power Down (Soft-Off) PC.

However, if your system is in the Suspend mode, you can wake-up the system only through an

IRQ or DMA interrupt. To use the LAN Wake-up function, you must enable the Wake Up On

LAN/Ring field (under Wake Up Events) in the Power Management Setup of the Award

BIOS. Connect the cable that comes with your LAN card to this connector on the system board.

Refer to the add-in card's manual for details.

Note: Your LAN card must support Magic Packet in order to use the LAN Wake-up function.

☆ MIDI/Game Port (Optional)

You may plug a joystick or game pad to this (Gold color) 15-pin female connector for game

playing, or connect a MIDI device for playing or editing audio.

☆ Audio Port (Optional)

You can connect powered speakers or headphones to (Lime color) Line Out jack. Cassette

players or other external audio sources can be connected to (Light Blue color) Line In jack.

Plug in your microphones to (Pink color) MIC jack.

User's Manual

Table of Contents