Table of Contents
Advertisement
MAINBOARD BIOS SETUP
☆ Typematic Delay
Select "Enabled" to set the length of delay before key strokes to repeat. Available
Options are "250","500","750", and "1000".
☆ Security Option
You can select whether the password is required every time the system boots or only
When you enter the Setup. You can assign "Supervisor Password" and "User
Password" in the main CMOS Setup Utility Screen.
☆ APIC MODE
This fileld is used to enable or disable the APIC (Advanced Programmable Interrupt Controller).
Due to compliance with PC2001 design guide, the system is able to run in APIC mode.
Enabling APIC mode will expand available IRQ resources for the system. Settings: Enabled
And Disabled.
☆ Mps Version Control For OS
This field allows you to select which MPS (Multi-Processor Specification) version to be used
For the operating system. You need to use, consult the vendor of your operating system.
Settings: 1.4 and 1.1.
☆ OS Select for DRAM > 64MB
If you are using OS/2 operating system and installed memory is larger than 64MB.
You need to need have the setting in the enable mode.
☆ HDD S.M.A.R.T. Capability
The item allows you to set HDD S.M.A.R.T. (Self Monitoring Analysis Reporting
Technology) Capability function. Please check with the HDD manufacturer or vendor
for the S.M.A.R.T. informatiom. Configuration options: Enabled and Disabled.
☆ Report No FDD For WIN 95
While the FDD in "STANDARD CMOS SETUP" is set to NONE, set this option to No
to release IRQ6 for passing Win95 logo. This option is irrelevant under normal operation.
User's Manual
38
Advertisement
Table of Contents
