Table of Contents
Advertisement
MAINBOARD BIOS SETUP
IDE Primary Master, IDE Primary Slave, IDE Secondary Master, IDE Secondary
CMOS Setup Utility - Copyright ( C ) 1984 - 1999 Award Software
IDE HDD Auto-Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
↑ ↓ → ←: Move Enter : Select
F1 : General Help F5 : Previous Value F6 : Fail-Safe Defaults F7 : Optimized Defaults
☆ Slave
These four options relate to the (4) IDE hard drives, CD-ROMs or other ATAPI devices that
can be controlled via the on-board IDE controller (review IDE Hard Drives and CD-ROMs in
the Installation Guide). The IDE Primary Master setting specifies the first device on the primary
IDE channel, IDE Primary Slave - the second. IDE Secondary Master and IDE Secondary
Slave specify the devices on the secondary channel.
Pressing <Enter> at each of the four selections brings up a submenu such as one shown
below:
!
☆ IDE HDD Auto-Detection
Automatically detects and configures hard disk parameters. The Award BIOS includes this
ability in the event you are uncertain of your hard disk's parameters.
IDE Primary Master
Press Enter
Auto
Auto
4303 MB
8894
15
0
8893
63
+/-/PU/PD : Value
User's Manual
Item Help
Menu Level >
To auto-detect the
HDD's size, head... on
This channel
F10 : Save
ESC : Exit
33
Advertisement
Table of Contents
