Table of Contents
Advertisement
HAREWARE INSTALLATION
2.2.3 Cooling Fan
The three fan connectors support cooling fans of 350mA (4.2 Watts) or a total of 1A (12W) at
+12V. Orient the fans so that the hear sink fins allow air flow to go across the onboard heat
sinks instead of the expansion Slots. The fan wiring and plug may vary depending on the
fan manufacturer. Connect the fan cable to the connector matching the black wire to the
ground pin. These are small3-pin Header Connectors that provide12-Volt power for CPU and
chassis cooling fans. Plug in the fan cable to the connector. Pin-2 corresponds to the RED
power lead as shown:
User's Manual
18
Advertisement
Table of Contents
