Use For The Purpose Intended - Siemens FIDAMAT 6 Operating Instructions Manual

Information for the owner
1.5

Use for the purpose intended

1-4
Attention
means that an undesirable event or condition may result if the note in
question is not observed.
Note
gives important information about the product, about using the
product, or about the corresponding part of the manual to which
special attention is to be drawn.
In this manual 'use for the purpose intended' means that this product may
only be used for the application cases described in the catalog and in the
technical description (in this regard see also "Technical description" from
page 2-1 onwards) and only in conjunction with third-party devices and
components recommended or approved by Siemens.
The product described in this manual has been designed, manufactured,
inspected and documented in compliance with the relevant safety
standards. For this reason, provided both the handling requirements
described for planning, installation, operation and maintenance and also
safety instructions are observed, under normal circumstances the unit will
not be a source of danger with respect to personal health and safety nor
with respect to damage to property. The analyzer has been designed in
such a way that a safe separation between primary and secondary
circuits is ensured. Extra-low voltages which are connected must also be
generated by safe separation.
Warning
Once the housing or shock-hazard protection has been removed or the
system cabinet opened, certain parts or components of this unit or
system which could be carrying a hazardous voltage become accessible.
For this reason only appropriately qualified personnel should be
permitted such access to this unit. These persons must have a thorough
knowledge of all sources of danger and of maintenance activities as
described in this operating manual.
FIDAMAT 6 gas analyzer
Operating manual – A5E00222135-01