Digital Output Do1A, Do1B Load Pull-Up / Pull-Down Wiring; Analog Input Terminals (Ai1, Ai2, +10 V, +5 V, Earth And Gnd) - REXROTH VFC 5610 Quick Start Manual

VFC 3610 / VFC 5610

Digital output DO1a, DO1b load pull-up / pull-down wiring

Fig. 2-9: Digital output DO1a, DO1b load pull-up / pull-down wiring
Vcc supply can be provided externally or internally.
For internal supply, ONLY USE +24 V and NEVER use +10 V or +5 V!

Analog input terminals (AI1, AI2, +10 V, +5 V, Earth and GND)

Fig. 2-10: Analog input terminals
The figures for AI2 and +5 V are similar to the above figure.
●
Incorrect operation may occur due to interference on the analog
●
signal. In such cases, connect a capacitor and ferrite magnetic
ring at the output side of the analog signal, as shown above.
DOK-RCON04-VFC-X610***-QU06-EN-P
Bosch Rexroth AG
Electric Installation
15/51