Table of Contents
Advertisement
Before You Play
Opening/Closing the Keyboard Cover
You must use both hands to open or close the keyboard cover.
Opening the Keyboard Cover
1 . Use both hands to lift the edge of the keyboard cover,
and push it away from yourself .
NOTE
If you have any objects (papers, metal objects, etc.) placed on
top of the keyboard cover, do not open the cover. Otherwise,
such objects may slip inside the instrument, and then become
irrecoverable.
Closing the Keyboard Cover
1 . Grasp and gently lower the edge of the keyboard
cover with both hands .
NOTE
• When opening / closing the keyboard cover or you operate
the pedals, please be careful not to get your fingers pinched
between the movable part and the unit. In places where
small children are present, make sure that an adult provides
supervision and guidance.
• Do not apply undue force to the music rest while it is in use.
Using the keyboard cover to conceal the panel (Classic Position)
If you raise the keyboard cover slowly, it stops at a position that
hides the buttons and the display. If you use the cover to hide the
operation panel, you'll be able to play as though you were playing
an acoustic piano. When you push the cover further inward and up,
it stops in a position where the operation panel is visible.
6
Turning the Power On/Off
Connecting the AC adaptor
1 . Connect the AC adaptor to the DC In jack located on
Turning the Power On
1 . Turn the [L] button ON .
2 . Use the Volume buttons to adjust the volume .
Turning Off the Power
1 . Long-press the [L](power) button .
NOTE
Keyboard cover
the bottom of the piano .
To AC outlet
After a brief interval, you'll be able to produce
sounds by playing the keyboard.
Before turning the unit on/off, always be sure to
turn the volume down. Even with the volume
turned down, you might hear some sound when switching the
unit on/off. However, this is normal and does not indicate a
malfunction
The volume increases when you press the [
button, and decreases when you press the [
button.
The volume indicator lights according to the
volume.
This will adjust the volume of the speakers if you're
using the speakers of the unit, or the volume of the
headphones if headphones are connected. Each volume setting
is saved automatically.
With the factory settings, the unit's power will automatically
be switched off 30 minutes after you stop playing or
operating the unit .
If you don't want the power to turn off automatically, change
the "Auto Off" setting to "OFF" as described on "Making the
Power Automatically Turn Off After a Time (Auto Off )" (p. 35).
When the power turns off, any unsaved data is lost. If there is
data that you want to keep, save it beforehand.
If the unit's power has been turned off automatically, you can
use the [L] button to turn the unit back on again.
Bottom
panel
Power cord
]
]
Advertisement
Table of Contents
