Interacoustics OtoRead Operation Manual page 43

SAVE TESTS
STD 762.03
#0123456
REVIEW
TIME/DATE ERROR
MIN VALUE
ON
OF
CLOCK MODE
LANGUAGE
RESET TO DEFAULT
RESET
DP
TE
OtoRead Screener
The Save Mode menu allows the user to change the
number of tests stored in the OtoRead from only the
most recent test result for each ear (L/R) to 250 tests.
Is shown briefly upon turning on the OtoRead.
Indicates the type of OtoRead, the software version
and the serial number.
Press the DOWN key to review the bar graphs which
are the test results displayed as the emissions are
measured.
Will appear if the Instrument's batteries go dead and
are not replaced within approximately one hour.
The minimum Amplitude screen which allows the user
to set the unit to include minimum amplitude values in
the pass/refer criterion.
Turns the parameter on.
Turns the parameter off.
The Clock Mode menu allows the user to change the
clock from a 12 hour mode to a 24 hour mode.
The Language setup allows the user to select among
English, German, Spanish and French.
Selecting the LEFT or RIGHT arrow key in the Reset
to Default menu will return the instrument settings to
their factory settings (does not affect the custom
settings).
Press the LEFT or RIGHT arrow key to return the
instrument settings to their factory settings
The OtoRead will test in the DPOAE mode.
The OtoRead will test in the TEOAE mode.
Operation Panel Dictionary Page 39