Setting The Clock - Interacoustics OtoRead Operation Manual

When the OtoRead test instrument is first used, the correct date and
time will need to be set on its internal clock. The date and time are
listed on the test printout as month-day-year (e.g., Feb-28-01). The
clock should be set prior to testing, as changing it after tests are
saved will not change the date on the printout (i.e., whatever date
was previously in memory will be the date on the printout). Seasonal
time changes such as Daylight Savings Time will also require
resetting the clock. If the instrument's batteries go dead and are not
replaced within approximately one hour, Display # 9 may appear. If
this message appears, reset the time and date.
Display # 9
Display # 11
To change the time and date press SETUP at the main menu
(Display # 2, page 18). Display # 10 will show the current date and
time presently set in the unit. If the time and date are correct, press
the UP key to escape back to the main menu. If either the date or
time is incorrect, press the CHANGE key to access the menu to
change the month (Display # 11). Press the LEFT or RIGHT keys to
scroll forward or backward through the months. You will see the
abbreviated name for each month. When the desired month appears
OtoRead Screener

Setting the Clock

Operating Instructions
Display # 10
Display # 12
Page 26