Operation Panel Dictionary - Interacoustics OtoRead Operation Manual

Operation Panel Dictionary

Symbol:
SETUP
TEST
R
L
NOISE
VOLUME
CAL TEST
LEFT EAR
RIGHT EAR
PASS
REFER
NO SEAL
NOISY
←
→
↓
10.35 AM
FEB-28-01
CHANGE
NEXT
DONE
TEST RESULTS
CLEAR
VERIFY CLEAR
OtoRead Screener
Function:
Setup menu from where Test Mode, Clearing Test
Results, Auto-Shutdown Time, Minimum Amplitude
Value, Save Mode, Clock Mode Language and Reset
to Default Settings can be reached and modified.
Starts the autotest.
Right Ear.
Left Ear.
Indicates the environmental noise level.
Indicates the ear canal volume.
Is briefly shown when the instrument performs a
calibration at the start of each test.
Shows the result of the test for the left ear.
Shows the result of the test for the right ear.
Indicates that the patient passed the screening.
Indicates that the patient did not pass the screening.
Indicates that a seal was not maintained throughout
the test.
Indicates that excessive noise was present during the
test.
Is used to change parameters in the current setup.
Is used to change parameters in the current setup.
Is used to browse through the current setup.
The time which will be displayed on the printout.
The date which will be displayed on the printout.
Use the LEFT and RIGHT arrow keys to change the
parameters.
Press the DOWN arrow key to save settings and go to
the next menu.
Press the DOWN arrow to save settings and return to
the Main Menu.
The Test Results Clear menu allows the user to clear
the test results stored in the unit. It displays the
number of test results which are currently saved in the
OtoRead.
Use the LEFT and RIGHT arrow keys to clear the
results stored in the OtoRead. Next choose YES to
verify clear and No to return to the menu without
clearing the menu.
Operation Panel Dictionary Page 38