Understanding The Dpoae Printed Results - Interacoustics OtoRead Operation Manual

Understanding the DPOAE Printed Results

Each test will generate its own printout.
1 1
5 5
6 6
7 7
8 8
9 9
12 12
1. The ear selected. If "Save 250 tests" is selected, a # will
appear here
2. The time and date of the test, based on the setting of the
internal clock. If the clock is set correctly, this time and
date will be correct.
3. The software version number.
4. The averaging time used for this test.
5. The mode selected for this test.
6. The frequency band.
7. The peak pressure level.
8. The level of the emission in dB SPL.
9. The noise floor in dB SPL.
10. The signal-to-noise ratio (TE level minus the noise floor).
11. A "P" indicates that the signal-to-noise ratio for the test
was equal to or above the SNR criterion.
OtoRead Screener Interpreting Test Results
2 2
3 3
4 4
10 10
11 11
13 13
Page 35