15
Adjusting electric edge guide
.11
Rule
The guide 3 should have a clearance of approx. 0.1 mm to the sewing foot 4 when se-
lecting a 1.0 mm seam depth (via the control panel.
Fig. 15 - 29
O Switch the machine on.
O Set the edge guide position to 1.0 mm, see chapter 9.07 Entering edge guide position
in instruction manual
O Adjust the edge guide 1 ( screws 2 ) according to the rule.
O Switch the machine off.
4
3
Adjustment
1
2
37