Table of Contents
Advertisement
Figure 7: Diagram of interface paths with a serial console connection
The serial port communication parameters are 115200 baud, no parity, 8 data bits and backspace key set to "Ctrl-h".
BIOS POST and configuration menu redirection is VT100+.
The ASCII control code for "Ctrl-g" is 7. To type "Ctrl-gg", use the "Ctrl-g" ASCII control code
twice in a row.
Example of a serial connection to the node CPU serial console (OS):
1.
2.
3.
Connect a PC's serial port to the active hub's console port.
Establish a connection using the PC terminal emulator with parameters 115200 8n1.
To configure the hub console port MUX, type Ctrl-g
www.kontron.com
MSP8040 Series User Guide Rev. 1.2
<Node No.
(1-9)>, then Ctrl-gg 1.
// 19
Advertisement
Table of Contents
