Interfacing; Table 5: Link Status And Speed Configurations - Kontron MSP8040 Series User Manual

1.7. Interfacing

Two types of connections can be established with node components: a networking connection and a serial console
connection.
Refer to the user guide of the hub used in the platform for information on how to access the
SM and for the locations of the management and console ports.
Node used with hub MSH8900
When used with hub MSH8900, the MSP804x node supports four 1GbE ports when it is installed in chassis slots 1-6
or 8.
In slots 7 and 9, the link speed of the MSH8900 must be set to 1GbE for a link to be established with all four ports. If
the speed is set to 10GbE, no link will be established with F1 and F2 (see Table 5).
For a complete port mapping and network topology of the system, refer to the hub user
guide
Node used with hub MSH8910
When used with hub MSH8910, no matter the slot the MSP804x is installed in, two 1GbE ports (B1 and B2) and two
10GbE ports (F1 and F2) are available.
For a complete port mapping and network topology of the system, refer to the hub user
guide

Table 5: Link status and speed configurations

Configuration
MSH8900 when speed of slots 7 and 9 is set to 1GbE
MSH8900 when speed of slots 7 and 9 is set to 10GbE 1GbE 1GbE No link No link
MSH8910
.
.
www.kontron.com
B1 B2 F1 F2
1GbE 1GbE 1GbE 1GbE
1GbE 1GbE 10GbE 10GbE
MSP8040 Series User Guide Rev. 1.2
// 15