Bluetooth Low Energy Technology Advertising; Introduction; Dongle Specifications; Procedure - Epson C31CE94061N Technical Reference Manual

Bluetooth Low Energy Technology Advertising

Introduction

When you connect the BT820 from Lairedtec to the USB A connector on the TM-T88VI and turn it on, the
Bluetooth low energy technology Advertising Packet is transmitted. By default, the TM-T88VI transmits the
packet according to the iBeacon Format from Apple. You can also change the data that is transmitted by
following the steps in
Glossary:
Bluetooth Low Energy Technology Advertising
Bluetooth Low Energy Technology Advertising
Packet
Bluetooth adapter
iBeacon

Dongle specifications

Manufacturer: Laird Tech
Model name: BT-820
For setting methods and settings, see the TM-T88VI Utility User's Manual.

Procedure

When turning on the TM-T88VI, the Bluetooth adapter connected to the USB Type A connector is enabled.
If you install the Bluetooth adapter after turning on the printer, this is not enabled.
Bluetooth Low Energy Technology Advertising Packet Format
In the TM-T88VI, the iBeacon format is used by default for the Bluetooth low energy technology Advertising
Packet.
The UUID for the T88VI is "fac1ba2f-61a2-4d83-9a8c-60087c232569".
The user can edit the following specifications in the iBeacon format: UUID, Major number, Minor number, and
Measured Power.
134
"Changing the Bluetooth Low Energy Technology Advertising Packet" on page
Term Description
The name of this function.
The data sent by this function from the printer.
The BT820 from Lairedtec
A USB dongle to connect to the USB Type A connector.
The format stipulated by Apple for Bluetooth low energy
technology Advertising Packets
When using the default settings for the TM-T88VI (Bluetooth
adapter installed in the printer and the printer is on), the Bluetooth
low energy technology Advertising Packet is transmitted in
iBeacon format.
135.