Table of Contents
Advertisement
Paper Specifications
Paper types
Form
Size
Roll paper diameter
Roll paper spool outer diameter
Roll width when taken up
Paper width
Paper thickness
Specified original paper type
• Paper must not be pasted to the roll paper spool.
• For the best print quality for each paper type, it is recommended to set the print density.
(See
• Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause
the thermal head to stick to the thermal paper surface during printing, and cause printing
failure and other problems. The pre-printing also can result in reduced print density. Using
thermal paper with a pre-printed recording surface, pre-printing should be done in accordance
with the conditions (ink type, printing and other conditions) recommended by the paper
manufacturer, and the thermal paper should be checked to ensure that there is no faulty
printing, loss of print density, or other problems.
80 mm model
Specified thermal paper
Roll paper
Max.: 83 mm {3.27"}
Min.: 18 mm {0.71"}
80+0.5/-1.0 mm {3.15+0.02/-0.04"}
79.5±0.5 mm {3.13 ±0.02"}
Maximum of 80 μm, minimum of 48 μm
TF50KS-EY (Nippon Paper Industries Co., Ltd.)
PD160R (Oji Imaging Media Co., Ltd.)
KT48FA (Koehler Paper Group)
Epson Certified Media List for Thermal Receipt Printers
U https://www.epson-biz.com/?content=sht_tm_media
"Software Settings" on page
26.)
Appendix
58 mm model
58+0.5/-1.0 mm {2.28+0.02/-0.04"}
57.5±0.5 mm {2.26±0.02"}
64
Advertisement
Table of Contents
