Rear Panel - FOR-A MFR-1616 Operation Manuals

2-2-2. Rear Panel

B
SERVICE 1
MFR-LAN
A
No. Item
A MFR-LAN *1
B SERVICE
C DC12V IN 1 and 2
D SERIAL 1 to 4
GPI 1
E
(Port no.: 1)
GPI 2
F
(Port no.: 2)
GPI 3
G
(Port no.: 3)
GPI 4
H
(Port no.: 4)
*1 The MFR-LAN connector may be labeled 10/100BASE-T on the previous model.
D
SERIAL
2 3 4
GPI 1 GPI 2
E F
Used to connect the MFR main unit
Ethernet port (10/100BASE-TX, RJ-45)
Used for maintenance only. Do not use.
Used to supply 12 V DC power.
Used for control via a serial interface. The default setting is
RS-232C. RS-422 is also selectable using switches on the card.
(See section 2-2-4. Switch Settings on the Internal Board.)
Pin assignments are the same as those of the MFR main unit.
(See section 2-1-3. "Interfaces.")
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
RATING LABEL
GPI 3
G
Description
20
2 -DC12V IN- 1
GPI 4
H C