Video Format Commands (11) - FOR-A MFR-1616 Operation Manuals

4-3-7. Video Format Commands (11)

Video format commands allow you to change router video format settings. (MFR-1616A not
supported.)
 Command Format
Command description
(1)
Sets video format,
reference and/or switching
point beforehand.
(2) Performs the set changes.
(3) Cancels the set changes.
*1
Reference and Switching points are non-compulsory. When they are not input, present
settings are output for command response.
MFR-1616/ MFR-1616R/ MFR-3216/ MFR-3216RPS/ MFR-3232/ MFR-3232RPS do not
support Reference and Switching points settings. When presetting and performing the set
changes, Auto("RA") is output for Reference and Field ("SF") is output for Switching
points.
"UR!W" is output at 5-seconds intervals after receiving "@[sp]UE:A." When execution
*2
environment is ready, "UR!<YY>/<R#>,<S$>" is output.
Commands
BYTE 1 2
(1) @ [sp]
(2) @ [sp]
(3) @ [sp]
Parameters
<YY> Video format
<R#> Reference
<S$> Switching point
* Commands are not executed if no video format is set or the current video format is set.
 Command Example 1
Changes Video Format to 720/59.94p.
Command
@[sp]UF:07[CR]
@[sp]UE:A[CR]
Commands
@[sp]UF:<YY>/<R#>,<S$>
*1
@[sp]UE:A
@[sp]UE:C
3 4 5 6
U F : <YY>
U E : A
U E : C
00: 1080/59.94i
01: 1080/59.94p
02: 1080/60i
03: 1080/60p
04: 1080/50i
05: 1080/50p
06:720/60p
RA: Auto
SF: Field
[CR][LF]UF!07/RA,SF[CR]
[CR][LF]UR!W
[CR][LF]UR!07/RA,SF[CR]
48
Command response
UF!<YY>/<R#>,<S$>
UR!W
UR!<YY>/<R#>,<S$>
UR!E
(error response)
UR!C
7 8 9 10
/ <R#>
CR
CR
07:720/59.94p
08:720/50p
09: 1080/30p
0A: 1080/29.97p
0B: 1080/25p
0C: 1080/24p
0D: 1080/23.98p
RB: B.B
SO: Odd
Command response
*2
11 12 13 14
, <S$> CR
0E: 1080/30psF
0F: 1080/29.97psF
10: 1080/25psF
11: 1080/24psF
12: 1080/23.98psF
13: NTSC
14: PAL
RT: Tri-Sync
SE: Even