6. Operation
The wire probes are very sensitive. The wires of the probe may not be
bend at the element and may not be pulled.
Only the probe itself is temperature-resistant. The handle, the cable
and the probe connector with the electronic may only be operated up
to +50 °C.
No pressure shall be applied to the hall element (ceramic) because it is
very pressure sensitive (risk of breaking)!
6.4.10 Axial Probe AS-HAP, AS-NAP, AS-LAP
6.4.11 Axial Probe AS-UAP GEO-X, AS-UAP Lot
Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
Figure 48 Axial probe
Figure 49 Axial probe AS-UAP GEO-X
Figure 50 Axial probe AS-UAP Lot
Page 65