Table of Contents
Advertisement
6. Operation
6.1
Introduction
This Operating Manual should be read carefully before measuring
instrument is operated for the first time.
Projekt Elektronik GmbH will not be responsible for damage to the
instrument caused by disregarding this Operating Manual. Neither will
responsibility be assumed for consequential damage resulting from
such mishandling of the instrument.
Also before initial operation, the content of the case should be checked for
completeness of the items supplied (see section 5.3 Items Supplied)!
6.2
Safety Notes
In order to ensure safe operation of the instrument, be sure to observe the
following recommendations:
•
The magnetic field meter was tested after manufacture for compliance
with all applicable safety standards and regulations. To preserve this
condition and to ensure safe operation, the user should be sure to
observe all safety notes and cautions included in this Operating Manual.
•
Before measurements, check your probe, probe cord, probe housing,
Teslameter housing, AS-Probe Adapter-housing, AS-Adapter 3-housing,
power adapter and power cord for damage.
•
If you believe that the instrument cannot be operated safely any longer,
switch it OFF, mark it accordingly and keep it in a manner to prevent
unintentional use.
Safe operation will not be possible if the unit, the probe, any connecting
cable, the battery or the accumulator, power adapter or power cord show
visible damage, or if the unit fails to operate.
•
This instrument must not be handled by children!
•
Due attention should be given to the accident prevention rules issued by
authorized bodies, especially to any rules concerning electromagnetic
fields.
Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
Page 20
Advertisement
Table of Contents
