6. Operation
6.3.3.17 Command "minimum"
command:
without
parameter
see also section 6.3.1.12 Key "min max" – Minimal Measurement, Maximal
Measurement
example:
minimum
display is min
6.3.3.18 Command "range"
command:
without
parameter
example:
range
range is 2000.0 mT
6.3.3.19 Command "relative"
command:
without
parameter
with parameter
Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
minimum
switches to minimal measurement
range
shows the current measuring range determined by probe
and gain setting
relative [{reference|set}]
show the current measuring mode and if in relative
measurement the reference value
"set" as parameter switches to relative measurement
and takes the current measured value as reference
value.
A
number
as
measurement and uses the given number as reference
(interpreted in the currently set unit and rounded to the
current resolution).
parameter
switches
to
relative
Page 45