Customer Service - Projekt Elektronik FM 302 Operating Manual

9. Customer Service

9.1 Calibration
As manufacturer we recommend the regularly recalibration (ca. once per
year). We have available the test equipment necessary for this device and
have the confirmation about the traceability to national standards (PTB). The
confirmation is given with a factory calibration certificate.
If measurements require the linearity curve (see section 6.4.14 Linearity
Curves (optional)), it must be re-created during calibration after
readjustment. This requirement should be noted in the order.
9.2 Repairs
For repairs send the instrument to the following address:
Projekt Elektronik Mess- und Regelungstechnik GmbH
Am Borsigturm 54
13507 Berlin
9.3 Follow-up Orders
Follow-up orders can be placed at Projekt Elektronik Mess- und
Regelungstechnik GmbH by letter, telephone or fax.
9.4 Disposal
Should disposal of the instrument be necessary, it can be returned to
Projekt Elektronik Mess- und Regelungstechnik GmbH
Am Borsigturm 54
13507 Berlin
freight/postage prepaid, together with a declaration of assignment.
Spent batteries or accumulators must not be discarded to general
garbage!
Spent batteries or accumulators should be turned over to an approved
hazardous waste collection site.
Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
Tel. +49 (0)30 - 43 03 22 40
Fax +49 (0)30 - 43 03 22 43
Page 116