Table of Contents
Advertisement
6. Operation
2012-03-28 12:48:39,0; 0,67; mT; min; -0,81; mT
2012-03-28 12:48:39,5; 0,57; mT; min; -0,81; mT
2012-03-28 12:48:40,0; -1,47; mT; min; -0,81; mT
2012-03-28 12:48:40,5; -7,33; mT; min; -1,47; mT
2012-03-28 12:48:41,0; -19,95; mT; min; -7,33; mT
2012-03-28 12:48:41,5; -35,88; mT; min; -19,95; mT
2012-03-28 12:48:42,0; -51,29; mT; min; -35,88; mT
2012-03-28 12:48:42,5; -46,67; mT; min; -51,29; mT
2012-03-28 12:48:43,0; -23,17; mT; min; -51,29; mT
2012-03-28 12:48:43,5; 5,86; mT; min; -51,29; mT
For storing the log file there can be chosen from two different formats The
log can be saved in classic csv format (comma separated values). In this
format the single data blocks are separated by a comma. The period is used
as decimal separator. Alternatively the semicolon may be used for
separating the data blocks which makes available the comma as decimal
separator. The second format simplifies the import into software with
German localization.
The created log files can easily be imported to every common program for
data evaluation like Microsoft Excel, OpenOffice Calc, Mathlab or gnuplot.
This allows to individually evaluate and process the measured data.
Depending on the selection in the logging settings, the corresponding
logging section is enabled.
In the mode "single value logging" single measured values can be saved
with a key press (mouse or keyboard). At every press of the button "log
value" the current measured value is stored to the log. This mode is suitable
for manual controlled measurements where a number of single values has
to be measured.
Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
Figure 29 Log file example
Figure 30 Single value logging
Page 54
Advertisement
Table of Contents
