Table of Contents
Advertisement
6. Operation
6.3.2
Usage of The Teslameter FM 302
Usually the AS-active-probe is simply connected to the Teslameter. The
Measurement can be started immediately.
Also all extended possibilities of the Teslameter FM 302 are usable in that
way. The calibrated analog output can be connected with e.g. with an
oscilloscope to display fast signal sequences A cable with BNC connector
has to be used.
To control via USB interface the FM 302 has to be connected to the
computer. The connection also can be made to a USB hub. Therefore an
ordinary cable with USB-B connector has to be used. Such a cable is
included in delivery.
Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
Figure 20 Usage of Teslameter FM 302
Page 33
Advertisement
Table of Contents
