Table of Contents
Advertisement
Advanced Microwave
Technologies
DVANTECH
2.4 SSPB SPECIFICATIONS
The SSPB specified herein is capable of meeting
in the following table over frequency range, operating temperature and line voltage variation unless
otherwise specified. The SSPB will meet all RF performance specifications within thirty minutes of
application of prime power.
L-Band Input Frequency
RF Output Frequency Range
Frequency Stability
RF Output Power @ 1 dB Gain Compression (P1dB)
Linear Gain
Gain Flatness:
Gain Variation Over Temperature
L-Band Input Impedance
L-Band Input Return Loss
Output Return Loss
Noise Figure
Spurious at rated P1dB
Harmonics at rated P1dB
Third Order Intermodulation
(two equal tones 5 MHz apart)
Local Oscillator Frequency
Local Oscillator Leakage
Output Phase Noise
@ Offset
.
TABLE 1: ELECTRICAL SPECIFICATIONS
over 500 MHz
over 40 MHz
100 Hz
1 kHz
10 kHz
≥100 kHz
or
exceeding the performance specifications listed
950 – 1450 MHz
14.000 – 14.500 GHz
Based upon 10 MHz Internal Reference
+ 48 dBm, min. (80 W saturated power)
69 ± 1 dB @ 14.250 GHz and +23 °C
4 dB p–p, max
1.2 dB, max
3 dB p-p, over the entire bandwidth
50 Ω
16 dB, min
20 dB, min
15 dB, max
- 60 dBc, max
- 60 dBc, max
- 33 dBc, max @ 7 dB total back-off from
rated P1dB
- 25 dBc, max @ 3 dB total back-off from
rated P1dB
2.175 GHz (virtual 13.050 GHz)
-50 dBc, at 3 dB back-off from rated P1dB
Ku-Band Single Side Band Phase Noise (max)
- 60 dBc/Hz
- 70 dBc/Hz
- 80 dBc/Hz
- 90 dBc/Hz
SSPBM-K100-BTE
Page 14
Advertisement
Table of Contents
