D Sending A Test Call Acknowledgement - Icom GM800 Instruction Manual

7
DSC OPERATION
■ Sending a Non-Distress calls
D Sending a Test call (continued)
3. Select "Test."
4. Select "Address."
5. Select an Individual ID, or "Manual Input."
(Example: STATION A)
NOTE:
When you select "Manual Input" in
this step, push the keypad to manually enter an
Individual ID.
6. Select "Call Frequency."
7. Select an option. (Example: 8414.5 kHz)
53
8. Push [Call]
Rotate
CH/GRP
+
Push
9. After sending, the following screen is displayed.
 See page 29 for details of the software key function
Rotate
in the DSC Task mode.
CH/GRP
+
Push
10. Push [Standby Mode]
Rotate
Standby mode.
CH/GRP

D Sending a Test call acknowledgement

+
Push When a Test call is received, you can send an
acknowledgement.
1. When a Test call is received:
• Alarm sounds.
• The following screen is displayed.
Push any [Alarm Off]
Rotate
CH/GRP
+
Push
Rotate
CH/GRP
+
Push
to send the Test call.
Push
to return to the
.
Push
any