D Transmitting A Test Acknowledgement Call - Icom IC-M92D Instruction Manual

8
DSC OPERATION
D Transmitting a Test Acknowledgement call
When the "TEST ACK" in DSC settings is set to 'Auto TX'
(p. 61), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
When a Test call is received, beeps sound and the screen
q
as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
47
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen
r
as shown below is displayed, and then returns to the nor-
mal operating mode.