Icom GM800 Instruction Manual page 24

6
OTHER FUNCTIONS AND OPERATIONS
■ Setting a User channel or an ITU Simplex channel
2. Setting an RX and TX operating frequencies (continued)
8. Enter a TX frequency.
After entering, push [▲], [▼], [◄], or [►] to select
"Done" and push [ENT]. (Example: 4.098.0)
3. Setting an opeoating mode
9. Select "Mode."
10. Select an operating mode. (Example: J3E)
19
4. Setting a channel name
You can set a channel name of up to 10 characters
for each User and ITU channel. This may be helpful
to indicate the frequency's use, or a ship's name.
11. Select "Name."
Push
+
Rotate
CH/GRP
to select
a character
12. Enter a channel name.
After entering, push [▲], [▼], [◄], or [►] to select
"Done" and push [ENT].
Rotate
CH/GRP
+
Push
13. Push [Save].
Rotate
CH/GRP
+
Push
• "Are you sure ?" is displayed.
14. Push [OK]
15. Push [MENU] to return to the Main screen.
Rotate
CH/GRP
Push
Rotate
CH/GRP
to select
a character
Push
to save the name.
+
Push
+