Dsc Settings; D Dsc Frequency - Icom GM800 Instruction Manual

■ DSC Settings

D Position Input (See page 27)
D Individual ID (See page 23)
D Group ID (See page 25)

D DSC Frequency

This set frequencies are selectable when you want to
send an Individual call, Group call, Geographical Area
call, Position Request call, or Test call. Usually your
dealer has set all the DSC frequencies to use.
To add a new DSC frequency:
1. Push [MENU].
2. Select "DSC Settings."
3. Select "DSC Frequency."
4. Select a DSC frequency number and push
[Edit] .
(Example: 50)
Push
5. Select "Use:."
6. Select an option. (Example: Call)
• Communication: Communication frequency that is
Rotate
CH/GRP
• Call:
+
Push
7. Select "Frequency."
Rotate
CH/GRP
+
Push
8. Enter an RX frequency.
After entering, select "Done" and push [ENT].
(Example: 4.390.0)
Rotate
CH/GRP
+
Push
9. Enter a TX frequency.
After entering, select "Done" and push [ENT].
(Example: 4.098.0)
Rotate
CH/GRP
+
Push
DSC OPERATION
Rotate
CH/GRP
Push
used to talk with other station after
DSC call communications.
DSC call frequency that is used to
send DSC calls.
Rotate
CH/GRP
Push
Push
Rotate
CH/GRP
to select
a character
Push
Rotate
CH/GRP
to select
a character
► Continued on the next page.
7
+
+
7
+
+
70