D Transmitting A Test Acknowledgement Call - Icom iM506 Instruction Manual

7
DSC OPERATION

D Transmitting a Test Acknowledgement call

When the "TEST ACK" in DSC settings is set to 'Auto'
(p. 68), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
q When a Test call is received, alarm sounds and the screen
shown below is displayed.
Push [ALARM OFF] to stop the alarm.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
Push [ACK].
w
45
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
r While transmitting the acknowledgement call, the screen
shown below is displayed, and then returns to the normal
operating mode.