Assignment Of The Ccu To A Vehicle By The Service Provider; Technical Data; Ccu-Modul; Two-Wire Connection Cable (Special Accessory) - Bosch CCU-Modul Important Information Manual

en 6 | CCU-Modul | Technical Data
8.3 Assignment of the CCU to a vehicle by the
service provider
i
The CCU-Modul must be assigned to a vehicle by the
repair shop carrying out the installation. The internet
address can be obtained from your service provider.
!
Always make sure the assignment of the vehicle to the
CCU-Modul is correct.
!
Once the CCU-Modul has been assigned to a vehicle, this
CCU-Modul may be installed in this vehicle only.
|
1 689 989 295 2017-06-27
9.

Technical Data

9.1

CCU-Modul

Property
Dimensions H x W x D
Temperature:
Storage and transportation
Temperature:
Function
Quiescent current
Operating voltage
Operating current, peak at 14.4 V
Weight
9.2 Two-wire connection cable
(special accessory)
Property
Temperature:
Operation, storage and transportation
Operating voltage
Fuse to SAE J2077 / ISO 8820-3
9.3

RED (Radio Equipment Directive)

Wireless link Frequency band
GSM 800 / 900 MHz
GSM 1800 / 1900 MHz
Value / range
27 x 127 x 65 mm
-40 °C – 85 °C
-40 °F – 185 °F
-20 °C – 60 °C
-4 °F – 140 °F
< 1,0 mA
9 - 16 V (DC)
260 mA
128 g
Value / range
-40 °C – 85 °C
-40 °F – 185 °F
32 V
2 A, ATM / MINI
Maximum radiated transmitter
power output
33 dBm
24 dBm
Robert Bosch GmbH