Fan Operation - Daikin Super Multi NX FFQ25B8V1B Service Manual

RA Indoor Unit
2.1.2 AUTO · DRY · COOL · HEAT · FAN Operation
AUTO · DRY · COOL · HEAT ·

FAN Operation

NOTE
MODE
•
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in
lower outdoor temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in
combination with the air conditioner.
•
The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation,
HEAT
it takes some time before the room gets warmer.
•
In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches
into defrosting operation to take away the frost.
•
During defrosting operation, hot air does not flow out of indoor unit.
•
This air conditioner cools the room by blowing the hot air in the room outside, so if the outside temperature is high, the
COOL
performance of the air conditioner drops.
•
The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically
DRY
controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
•
In AUTO operation, the system selects a temperature setting and an appropriate operation mode (COOL or HEAT) based
AUTO
on the room temperature at the start of the operation.
•
The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
•
FAN This mode is valid for fan only.
11
134
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
To start operation
1.
Press
• Each pressing of the button advances the mode setting in sequence.
AUTO DRY
2.
Press .
• " " is displayed on the LCD.
• The multi-monitor lamp lights up.
The colour of the lamp varies depending on
the operation mode.
Display
To stop operation
Press again.
• " " disappears from the LCD.
• The multi-monitor lamp goes off.
Notes on each operation mode
and select a operation mode.
COOL HEAT
SiBE121021_C
FAN
Operation Multi-monitor lamp
AUTO Red/Blue
DRY Green
COOL Blue
HEAT Red
FAN White
Operation Manual