Daikin Super Multi NX FFQ25B8V1B Service Manual page 458

Trial Operation
BRC1E51A7
Before test operation
How to activate test operation
How to check airflow direction
How to deactivate test operation
446
Step Action
1 Turn on the power supply more than 6
hours before test operation.
2 Open the gas stop valve.
3 Open the liquid stop valve.
4 Press and hold the [Cancel] button (
for 4 seconds to enter the Field setting
menu.
5 Use the buttons to select Test
operation ON/OFF and push the [Menu/
Enter] button (
6 Test operation is displayed on the bottom
of the basic screen.
7 Push the [ON/OFF] button (
seconds to start the test operation.
8 Push the [Menu/Enter] button (
enter the Main Menu.
9 Use the buttons to select Airflow
direction and push the [Menu/Enter]
button ( ).
10 Check that the airflow direction is actuated
according to the setting and push the
[Menu/Enter] button (
11 Press and hold the [Cancel] button (
for 4 seconds to enter the Field setting
menu.
12 Use the buttons to select Test
operation ON/OFF in the menu and push
the [Menu/Enter] button (
Remote controller
)
).
) within 10
) to
) .
)
).
SiBE121021_C
(R12872)
(R12873)
(R12874)
(R12875)
(R12876)
Trial Operation and Field Settings