Daikin Super Multi NX FFQ25B8V1B Service Manual page 257

SiBE121021_C
Set temp mode changeover
Limit Operation
Limit operation provides thermostat control within the range of the set minimum and maximum temperature.
The minimum temperature setting will trigger heating. The maximum temperature setting will trigger cooling.
Operation Method
1
Basic screen
2
3
English
Operation Manual
The limit operation can not be enabled when a centralized control is connected.
• Display the main menu screen.
(See page 26.)
• Press buttons to select "Set
temp mode changeover" on the
main menu screen.
• Pressing Menu/Enter button takes
you back to the basic screen, and
the set temperature is displayed in
max °C min °C.
* To return to the normal set temperature
screen, use "Set temp mode changeover" in
the Main Menu again.
• To change the set temperature,
press buttons.
The set temperature is highlighted
and ready to be changed.
• The set temperature will increase by
1°C when the
and decrease by 1°C when the
button is pressed.
Note
• The difference between the maximum and minimum
temperatures cannot be set to less than 6°C.
(* Maximum temperature – Minimum temperature ≥ 6°C)
• Pressing buttons switches the
variable set temperature between
max. and min.
SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
(Limit Operation)
button is pressed
27
245