Daikin Super Multi NX FFQ25B8V1B Service Manual page 267

SiBE121021_C
4
English
Operation Manual
SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
• Press buttons to move the
highlighted item and press
to select the desired operation.
The following three types of operations are
available.
*1.switch on the installation at a scheduled time,
in combination with a set point (exact
temperature control)
*2.switch on the installation at a scheduled time,
in limit operation
*3.switch off the installation (end of control)
* The status remain unchanged in the case of "–".
The display changes in sequence as shown below
when buttons are pressed.
— 22°C 20°C-26°C
* *1
• To make an operation change at set
temperature, press
the highlighted item and press
buttons to set the operation to
• To change the set temperature, press
the Menu/Enter button so that the set
temperature will be highlighted and
ready to be changed.
• Press buttons to change the set
temperature.
The set temperature will increase by 1°C
when the button is pressed and
decrease by 1°C when the
pressed.
• Pressing Menu/Enter button enters the
set temperature change.
buttons
OFF
*2 *3
buttons to move
.
button is
37
255