SiBE121021_C
Operation Contents
Program Dry
The Program dry function of the system repeats the weak cooling
operation of the system intermittently to dehumidify the room without
dropping the room temperature as much as possible for the
prevention of excessive cooling.
Program Dry Operation
• The microcomputer is in automatic temperature and fan speed control. Therefore, temperature or
fan speed settings cannot be made or changed while the air conditioner is in operation.
Home Leave
Home Leave is a feature that enables to keep the room temperature above 10°C when the
occupants are out.
Note
• This function will switch on heating if the installation is switched off.
• For the setting, please contact your local dealer.
Operation Method
1
English
Operation Manual
The home leave can not be enabled when a centralized control is connected.
• Press and hold the "
for at least four seconds. (During
backlight lit)
• The Home Leave icon displays and
function is enabled.
The Home Leave icon shows the status
of the home leave function.
ON
Home leave is enabled
FLASHING
Home leave is active
OFF
Home leave is disabled
• To cancel the home leave mode, continue
pressing Menu/Enter button for at least
four seconds. (During backlight lit)
SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
" or "
" button
19
237