Daikin Super Multi NX FFQ25B8V1B Service Manual page 244

SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
Basic Operation Method
Cool/Heat/Auto/Fan Operation
Remote Controller Functions
Operation screen
display
Describes screens that
will be displayed on the
remote controller in
operation.
Preparation
•
For mechanical protection purposes, turn ON the system at least six hours before starting the
operation of the system.
•
Do not turn OFF the system in season in order to ensure the smooth starting of the system.
Operation Method
1
14
232
Operation procedure
Explains a button operation
procedure for the remote controller.
Operate the buttons according to
the procedure.
Operation Method
1
•
Displays the main menu screen.
1/2
(See page 26.)
f
•
Press
screen.
Press Menu/Enter button to display
i 2/2
the timer settings screen.
* Items presently enabled or disabled are
displayed.
•
Press Operation Mode Selector button
several times until the desired mode
Cooling, Heating, Fan, or Auto mode is
selected.
* Unavailable operation modes are not displayed.
* Only the Cooling or Fan mode can be selected if the air
conditioner is a cooling-only model.
* The Auto mode can be set in the case of the VRV cooling/
heating simultaneous operation system.
* Changeover under control will appear on each remote controller,
but only the Cooling or Fan mode can be set in the case of the
VRV cooling-only system.
Note
•
Before making a mode change, make sure that Changeover
under control is not displayed on the remote controller.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller. See page 21 if Changeover
under control display blinks.
(Use of Direct Buttons)
(SkyAir and VRV)
Operation button
display
Displays the positions of
buttons to be operated.
buttons to select
on the main menu
SiBE121021_C
English
Operation Manual