Cs Cooktop 48_5Wiring Schematic - DCS CS-366 Installation Manual

CABINET PREPARATION
STEP 3: (CONTINUED)
6} Cut the openings for the following installation:
l Standard counter top installation, see Fig. 5A
[] Deep counter or island installation, see Fig.5B
NOTE: If the deck is used, the sides or bottom of
the cutout may be solid combustible or
non-combustible meterieL If the bottom
is solid, provide e 6" x 6" cutout in the
left reer corner for the ges inlet end
power cord clearance.
Front projects outward as shown
from standard depth cabinet.
_F[ush with cabinets
Front flush with cabinets; a minimum of
25 3/4"cabinet depth required
Fig. 2
@
_O
_0
Counter-Sunk Screws
Fig. 3