DCS CTD-365 Use And Care Manual
Professional drop-in cooktops, 36” – 5 burner cooktop, 30” – 4 burner cooktop
Hide thumbs
Also See for CTD-365:
- Specifications (2 pages) ,
- Use and care manual (36 pages) ,
- Installation manual (40 pages)
Related Manuals for DCS CTD-365
Summary of Contents for DCS CTD-365
- Page 1 PROFESSIONAL DROP-IN COOKTOPS • 36” – 5 BURNER COOKTOP • 30” – 4 BURNER COOKTOP Use and Care Manual MODELS: CTD-365 (shown) CTD-304...
- Page 3 NOTE: Inspect the product to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate a damage claim. DCS by Fisher & Paykel is not responsible for shipping damage. DO NOT discard any packing material (box, pallet, straps) until the unit has been inspected.
-
Page 4: Table Of Contents
TABLE OF CONTENTS SAFETY PRACTICES AND PRECAUTIONS COOKTOP USE Control Knobs Cooking Utensils Burners Electronic Igniters Burner Efficiency Flame Height Burner Grates CARE AND MAINTENANCE Cleaning the Cooktop Cleaning the Burner Grates Cleaning the Burners Cleaning the Igniters PRODUCT MEASUREMENT SPECIFICATIONS 10-11 SERVICE WARRANTY... -
Page 5: Safety Practices And Precautions
SAFETY PRACTICES & PRECAUTIONS When properly cared for, your new DCS Appliance has been designed to be a safe, reliable cooking appliance. When using this restaurant caliber appliance, use it with extreme care, as this type appliance provides intense heat and can increase the accident potential. Basic safety precautions must be followed when using kitchen appliances, including the following: Read this Use and Care Manual thoroughly before using your new appliance. - Page 6 SAFETY PRACTICES & PRECAUTIONS Be certain to use only dry pot holders; moist or damp pot holders on hot surfaces may cause burn injury from steam. Do not use a towel or other bulky cloth in place of pot holders. Do not let pot holders touch hot burners, or burner grates.
- Page 7 SAFETY PRACTICES & PRECAUTIONS Be sure all the cooktop controls are turned off and the appliance is cool before using any type of aerosol cleaner on or around the appliance. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal parts to corrode.
-
Page 8: Cooktop Use
COOKTOP USE CAUTION: For warranty coverage, DCS requires that burner adjustments be made by a qualified technician at the time of instal- lation. Extreme care should be used when adjustments are made after installation. CONTROL KNOBS: The control knobs and knob bezels are readily associated with the burners they control and are located on the right hand side of the Cooktop. -
Page 9: Electronic Igniters
It is necessary to keep the burner ports and the igniters clean for proper lighting and efficient performance. The burner flame should burn completely around the burner with no excessive noise or lifting. The flame should be blue in color and stable with no yellow tips. CTD-304 CTD-365 Burner SIMMER Burner SIMMER MAX. -
Page 10: Care And Maintenance
CARE AND MAINTENANCE CLEANING THE COOKTOP WARNING: Be careful cleaning any part of this appliance while hot. All parts of the appliance can be cleaned with a small amount of hot soapy water, rinsed, dried and buffed to a shine with a soft, heavy pile cloth. Always try this first, as it is the mildest cleaning procedure. -
Page 11: Cleaning The Burners
CARE AND MAINTENANCE CLEANING THE BURNERS: For proper lighting and performance, keep the burners clean and dry. It is necessary to clean the burners if they do not light although the igniter clicks, whenever there has been a severe boil over or when the flame doesn’t burn Brass Ring blue. -
Page 12: Product Measurement Specifications
PRODUCT MEASUREMENT SPECIFICATIONS Dimensions shown below are for product reference only. REFER TO THE PRODUCT INSTALLATION GUIDE FOR CABINET PREPARATION AND CUTOUT SPECIFICATIONS. CTD-365 Grate (P/N 12368)(2 pcs) ‘C’ Burner Cap ‘D’ Burner Cap (P/N 12272)(1 pcs) (P/N 12273)(4 pcs) -
Page 13: Product Measurement Specifications
PRODUCT MEASUREMENT SPECIFICATIONS Dimensions shown below are for product reference only. REFER TO THE PRODUCT INSTALLATION GUIDE FOR CABINET PREPARATION AND CUTOUT SPECIFICATIONS. CTD-304 ‘C’ Burner Cap (P/N 12273)(3 pcs) Grate (P/N 12325)(2 pcs) Knob (P/N 14301)(4 pcs) Top View "... -
Page 14: Service
SERVICE HOW TO OBTAIN SERVICE: For warranty service, contact our DCS Customer Care Representative at (888) 936-7872. Before you call, please have the following information ready: Model Number (located at the bottom of chassis, right corner) Serial Number (located at the bottom of chassis, right corner) -
Page 15: Warranty
WARRANTY LIMITED WARRANTY When you purchase a new DCS Drop-in Cooktop you automatically receive a One Year Limited Warranty covering parts and labor for the entire product, and a Five Year Limited Warranty on the structural integrity of the exterior and interior body parts for servicing within the 48 mainland United States, Hawaii, Washington D.C. - Page 16 Please read your Use and Care Guide. If you then have any questions about operating the Product, need the name of your local DCS Authorized Service Agent, or believe the Product is defective and wish service under this Limited Warranty, please contact your dealer or call us at: TOLL FREE 1-888-936-7872 or contact us through our web site: www.dcsappliances.com...
- Page 17 Fisher & Paykel Appliances, Inc. 5900 Skylab Road, Huntington Beach, CA 92647 Customer Care: 888.936.7872 Fax: 714.372.7003 www.dcsappliances.com As product improvement is an ongoing process, we reserve the right to change specifications or design without notice. Nous améliorons constamment ses produits et se réserve le droit de modifier les spécifications ou la conception de ses produits sans aucun préavis.