Ambient Conditions - vacuubrand BVC control Instruction Manual

NOTICE
NOTICE
Provide a firm level platform for the equipment. Ensure a
stable position of the pump without any mechanical con-
tact except of the pump feet. Comply with all applicable
safety regulations.
Check fan regularly for dust/dirt, clean if necessary to
avoid reduced ventilation. Avoid high heat supply. If the
equipment is brought from cold environment into a room
for operation, allow the equipment to warm up. (Watch for
water condensation on cold surfaces.)
The diameter of the an outlet tubing should be at the least
as large as the diameter of the pump connections.
Comply with all applicable and relevant safety require-
ments (regulations and guidelines), implement the re-
quired actions and adopt suitable safety measures.

Ambient conditions

To the best of our knowledge the equipment is in com-
pliance with the requirements of the applicable EC-direc-
tives and harmonized standards (see "Declaration of con-
formity") with regard to design, type and model, especially
directive DIN EN 61010-1. This directive gives, in detail,
conditions, under which the equipment can be operated
safely (see also IP degree of protection).
Adopt suitable measures in case of differences, e. g. us-
ing the equipment outdoors, installation in higher altitudes,
conductive pollution or bedewing.
Pay attention to the permissible maximum ambient
temperatures (see "Technical data").
page 9 of 76