Ambient Conditions - vacuubrand MZ 2C NT+2AK Instructions For Use Manual

Allow the equipment to equilibrate to ambient temperature
if you bring it from cold environment into a room prior to
operation. Notice if there is water condensation on cold
surfaces.
Secure coolant hoses at the hose nozzles (e.g., with hose
clamp) to prevent their accidental slipping.
Comply with all applicable and relevant safety require-
ments (regulations and guidelines). Implement the re-
quired actions and adopt suitable safety measures.

Ambient conditions

To the best of our knowledge the equipment is in com-
NOTICE
pliance with the requirements of the applicable EC-direc-
tives and harmonized standards (see "Declaration of Con-
formity") with regard to design, type and model. Directive
EN 61010-1 gives in detail the conditions under which the
equipment can be operated safely (see also IP degree of
protection, "Technical data", pg. 26).
➨ Do not reach for this product if it has fallen into liquid.
There is a risk of deadly electrical shock. Unplug the
system immediately.
+ Do not use this product in an area where it can fall or
be pulled into water or other liquids.
• This product may only be used indoors in a non-explo-
sive atmosphere, and in a dry environment.
Adopt suitable measures in case of differences from
recommended conditions, e.g., installation in higher
altitudes (risk of insufficient cooling), conductive pollu-
tion or external condensation on the pump.
• Do not operate this product near flames.
page 16 of 80