Weather Channels - Icom IC-M92D Instruction Manual

D U.S.A., International and Canadian channels
The transceiver is pre-programmed with 59 U.S.A., 59 Inter-
national and 63 Canadian channels. These channel groups
may be specified for the operating area.
Push [ MENU].
q
Push [Y]/[Z] to select "Radio Settings".
w
• U.S.A., International and Canadian channel groups can be se-
lected in sequence.
[Y]/[Z] to select "CHAN Group".
Push
e
r Select between "USA", "INT" and "CAN".
t Select "EXIT" while the desired channel group is selected
to return to the home screen.
• "DUP" appears for duplex channels.
D

Weather channels

The IC-M92D has 10 pre-programmed weather channels.
These are used for monitoring broadcasts from NOAA (Na-
tional Oceanographic and Atmospheric Administration.)
The transceiver can automatically detect a weather alert tone
on the selected weather channel while receiving on another
channel, during standby on a regular channel or while scan-
ning. (p. 44)
To Select a Weather channel:
Select "CH/WX" to select a weather channel.
• "WX" appears when a weather channel is selected.
• Weather channel alert icon appears when the alert function is
turned ON.
To set the Weather Alert:
[MENU].
Push
q
Push [Y]/[Z] to select "Radio Settings".
w
[Y]/[Z] to select "WX Alert".
Push
e
r Select "ON" to set the Weather Alert. .
t Select "EXIT" while "ON" is selected to return to the home
screen.
• WX Alert icon appears.
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10