Icom IC-M92D Instruction Manual page 34

8
DSC OPERATION
Transmitting DSC calls
■
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL LEVEL. (p. 64)
D Transmitting an individual call
The Individual call function allows you to transmit a DSC sig-
nal to only a specific station.
Enter "INDIVIDUAL CALL" in the DSC CALLS menu.
q
➪
MENU
(Push [MENU])
Select the desired preprogrammed individual address, or
w
"Manual Input," using [Y]/[Z], then push [ENT].
• The ID code for the Individual call can be set first. (p. 19)
• When "Manual Input" is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
27
DSC Calls ➪ Individual Call
(Push [Y]/[Z], then push [ENT].)
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT].
• The first digit is specified as '0' for a Group ID.
• The first two digits are '0' for any coast station ID.
Select Routine, Safety or Urgency as the desired call type
e
using [Y]/[Z], then push [ENT].
NOTE: When a coast station is selected in step w, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step r and go directly to step t.
☞ Continued on the next page.