D Receiving An All Ships Call - Icom IC-M92D Instruction Manual

8
DSC OPERATION
D Receiving an All Ships Call
When an All Ships Call is received:
➥ The emergency alarm sounds for 2 minutes, depending on
the received Category.
➥ "RCVD ALL SHIPS CALL" pops up. The LCD backlight
blinks for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the backlight
q
blinking.
• If you haven't pushed [ALARM OFF] within 2 minutes, the next
screen automatically appears, depending on the received Cat-
egory.
Push either softkey to select a desired action.
w
55
[EXIT]
➥ Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Re-
ceived Call Log.
[INFO]
➥ Push to display the Received call information. (p. 59)
[CH xx*]
* xx is specified by the calling station. (Example: 16)
➥ Push to monitor the specified channel for an announce-
ment from the calling station.