How It Works - Wilson Electronics SIGNALBOOST 811210 Installation Manual

Installation Instructions for the Following Wilson Amplifi er Kit:
SIGNALBOOST™ Mobile Amplifi er Kit with Phone Cradle
Model #811210
FCC ID: PWO819DA
Patent Pending
The term "IC" before the radio certifi cation number only signifi es that
Industry Canada technical specifi cations were met.
Inside this Package
SIGNALBOOST™
amplifi er
Ultra-Slim
Antenna

How it Works

Your new Wilson SignalBoost™ Mobile Amplifi er Kit with Phone Cradle includes everything
you need to begin enjoying improved cellular performance in mobile applications. This kit
will amplify the signals to and from the cell phone that you place in its cradle.
The kit includes the magnet-mount outside antenna, one of Wilson's most popular products,
which will collect the signal from the cell tower and send it through the cable to the
SignalBoost™ mobile amplifi er. The amplifi er's state-of-the-art technology is designed to
increase your signal up to 10 times, and reduce disconnects and dropouts. The amplifi ed
signal is sent to the Cell Phone Cradle Plus, Wilson's versatile phone cradle, which has a
signal coupler built right in. Your cell phone then communicates with the improved signal.
When the cell phone transmits, the signal goes through the cradle coupler, is then boosted
by the amplifi er and broadcast back to the cell tower through the outside antenna.
Most importantly, the Cradle Plus provides a convenient place to stow a cell phone and
allows the driver to keep both hands on the wheel while using the phone, greatly increasing
safety. This kit includes three mounting options for installing the cradle on the dash or
console of your vehicle.
Part #811214
Cell Phone
Cradle Plus
Earbud
Adhesive
Bracket
IC: 4726A-819DA
12 V DC
power supply
Magnet-Mount
Antenna
Adhesive/Screw
Swivel Bracket
Air-vent
Bracket
2