Wilson Electronics SIGNALBOOST 811210 Installation Manual
Mobile amplifier kit with phone cradle
Hide thumbs
Also See for SIGNALBOOST 811210:
- Installation manual (12 pages) ,
- Installation manual (7 pages)
Table of Contents
Advertisement
Quick Links
Amplifier Kit
Amplifier Kit
Installation
stallatio
stallat
Guide
Contents:
Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · ·
How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Installing the Magnet-Mount · · · · · · · · · · · · · · · · · · · · · · 4
Installing the SIGNALBOOST™ Amplifi er · · · · · · · · · · · 5
Installing the Cradle Plus · · · · · · · · · · · · · · · · · · · · · · · · 5
Attaching the Ultra-Slim Antenna · · · · · · · · · · · · · · · · · · 7
Powering Up the Amplifi er · · · · · · · · · · · · · · · · · · · · · · · 8
Connecting the Earbud · · · · · · · · · · · · · · · · · · · · · · · · · 8
Warnings and Recommendations · · · · · · · · · · · · · · · · · 9
About Wilson Electronics · · · · · · · · · · · · · · · · · · · · · · · 10
Amplifi er Specifi cations · · · · · · · · · · · · · · · · · · Back Cover
SIGNALBOOST™
Mobile Amplifi er Kit
with Phone Cradle
!
Warning: This manual contains
important safety and operating information.
Please read and follow the instructions
in this manual. Failure to do so could be
hazardous and result in damage to your
amplifi er.
1
Wilson
®
Electronics, Inc.
Advertisement
Table of Contents
Related Manuals for Wilson Electronics SIGNALBOOST 811210
Summary of Contents for Wilson Electronics SIGNALBOOST 811210
-
Page 1: Table Of Contents
Warnings and Recommendations · · · · · · · · · · · · · · · · · 9 About Wilson Electronics · · · · · · · · · · · · · · · · · · · · · · · 10 Amplifi... - Page 2 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer.
-
Page 3: How It Works
Installation Instructions for the Following Wilson Amplifi er Kit: SIGNALBOOST™ Mobile Amplifi er Kit with Phone Cradle Model #811210 Part #811214 FCC ID: PWO819DA IC: 4726A-819DA Patent Pending The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi... -
Page 4: Before Getting Started
Before Getting Started This guide will help you properly install Wilson’s SignalBoost™ Mobile Amplifi er Kit with Phone Cradle. It is important to read through all of the installation instructions for this kit prior to installing any of the equipment. Read through this installation guide, visualize where all of the parts will be installed, and do a soft installation before mounting any equipment. -
Page 5: Installing The Magnet-Mount
Installing the Wilson Magnet-Mount Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof that is 12 inches away from any other antennas and free of obstructions. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. -
Page 6: Installing The Signalboost™ Amplifi Er
Installing the Wilson SIGNALBOOST™ Mobile Amplifi er Warning: Do not plug in the DC power supply until the antenna and Cradle Plus cables are attached to the amplifi er. Select a location to install the amplifi er that is away from excessive heat, direct sunlight or moisture and that has proper ventilation. - Page 7 Option 2 - Adhesive Bracket Clean the area where the bracket is to be mounted with rubbing alcohol and a soft cloth. Allow to dry. Peel the backing to expose the adhesive and press the bracket onto the desired location in the vehicle. Note: be sure the bracket is positioned vertically, not horizontally.
-
Page 8: Attaching The Ultra-Slim Antenna
Attaching the Wilson Ultra-Slim Antenna Amplifi er Ultra-Slim Antenna The Ultra-Slim must be placed directly on the cell phone or cellular data card to work properly. Attach the Ultra-Slim to the cell phone or cellular data card with the VELCRO ®... -
Page 9: Powering Up The Amplifi Er
Powering up the Amplifi er Make sure both the outside antenna and Cradle Plus (or universal connector) cables are connected before powering up the amplifi er. Connect the power cable from the DC power supply to the amplifi er input marked “Power”... -
Page 10: Warnings And Recommendations
Warnings and Recommendations Warning: Do not plug the amplifi er directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the power supply until the outside antenna and Cradle Plus (or Ultra-Slim Antenna) cables are attached to the amplifi... -
Page 11: About Wilson Electronics
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifi ers, antennas and related components that signifi cantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building. -
Page 12: Amplifi Er Specifi Cations
Amplifi er Specifi cations Dual Band 800/1900 MHz Specifi cations Model Number 811210 Connectors FME-Male Impedance (input/output) 50 Ohms Dimensions 5 x 3.5 x 1.2 inch or 12.7 x 8.9 x 3 cm Weight 1.03 lbs or 0.468 kg Frequency 824-894 MHz / 1850-1990 MHz Passband Gain (nominal) 800 MHz (uplink/downlink)
Need help?
Do you have a question about the SIGNALBOOST 811210 and is the answer not in the manual?
Questions and answers