Frame Sync Connector; Output Specifications; Video Outputs; Analogue Composite Video - TANDBERG TT1260 Reference Manual

B.7

Frame Sync Connector

The Decoder can frame lock to an external video source. The frame information is input as a
composite synchronous signal, with or without active video. The user can offset the sync to
the video output by ±32,000 HD pixels, with a resolution of one pixel.
It is possible to connect multiple Receivers to the same reference signal. This input requires
an external 75 Ω termination.
Table B.34: Frame Sync Connector
Item
Safety status
Connector type
Connector designation
Pin:
B.8

Output Specifications

B.8.1

Video Outputs

Analogue Composite Video

Table B.35: Analogue Video Output Connectors
Item
Safety status
Connector type
Connector designation
Video standards
Video level (luminance)
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.3
Specification
SELV
BNC, Female
Frame Sync
Centre Analogue Black and Burst Input
Shield Ground/Chassis
Specification
SELV
2 x BNC Female socket 75 Ω
CVBS 1
CVBS2
PAL – I, B, G, D
PAL – N
Combination PAL - N
PAL - M
NTSC-M (with and without pedestal) (set on Video Menu, 3.1)
1000 mV ± 30 mV
Technical Specification
Page B-23