TANDBERG TT1260 Reference Manual page 173

Contents
E.1 Configuring the TT1260 for Use With
TANDBERG DirectorV5 ....................................E-3
E.1.1 Getting Started.......................................E-3
E.1.2 Using the TT1260 in the Over-air
Mode......................................................E-3
E.2 Response to Over-air Commands.....................E-4
E.2.1 Scope of This Section ............................E-4
E.2.2 Display On-screen Display (OSD)
Messages ..............................................E-4
E.2.3 Store Carrier Data..................................E-4
E.2.4 Set Power up Channel ...........................E-4
E.2.5 Force Carrier Retune .............................E-4
E.2.6 Force Service Selection .........................E-4
E.2.7 Set Emergency Channel ........................E-5
E.2.8 Set Relays .............................................E-5
E.2.9 Local Lockout.........................................E-5
E.2.10 Abort NCP Command ............................E-5
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.3
E. Using the TT1260 with the
TANDBERG DirectorV5 System
Annex E
Page E-1